Meyer Sound M'elodie M Series Spécifications télécharger pdf (Page 26)

MG-M’ELODIE MULTIPURPOSE GRID AND ACCESSORIES

PN: 05.152.019.01 B

Page 26 of 48

Meyer Sound Laboratories Inc.

www.meyersound.com

T: +1 510 486.1166

F: +1 510 486.8356

USING THE MTF-MICA/MG-M’ELODIE TRANSITION FRAME TO FLY M’ELODIE

UNDERNEATH A 600-HP ARRAY

When using full-range combined arrays with 600-HP subwoofers at the top of the array and M’elodie enclosures be-

low, the MTF-MICA/M’elodie transition frame is used between the lowest 600-HP subwoofer and the ﬁrst M’elodie in

the combined array.

Please note that the transition frame receives the AlignALinks from the 600-HP and the M’elodie is attached by using

the MTF-M’elodie links.

In this application, the transition frame allows angles from +15 degrees (uptilt) to -13 degrees (downtilt) between a

600-HP and the M’elodie beneath it. The uptilt is useful in applications where the array of subwoofers need to be at 0

degrees but the ﬁrst M’elodies in the array need to be uptilted with respect to the 600-HP subwoofers.

These positions are available as the result of the combination of the angle between the bottom 600-HP and the frame,

and the frame and ﬁrst M’elodie. These angles can be adjusted independently, yielding a large number of possibilities.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Pas de commentaire

Meyer Sound M'elodie M Series Spécifications Page 26