Meyer Sound UP-4XP Instructions d'exploitation télécharger pdf (Page 27)

UP-4XP OPERATING INSTRUCTIONS

5. Repeat the previous steps to attach the EN3 5-pin female connector to the other end of the cable.

ASSEMBLING EN3-TO-PHOENIX LOUDSPEAKER CABLES

When connecting UP-4XP loudspeakers equipped with EN3 connectors to the MPS-488HPp power supply, you need an

EN3 5-pin female to Phoenix 5-pin female cable. The following procedure documents how to assemble this cable. If you are

starting with an EN3-to-pigtail cable, you can skip steps 4–7 in this procedure.

To assemble an EN3-to-Phoenix cable:

1. If cable has not been stripped, strip the outer shielding 1 inch and then strip the black, red, blue, and white wires

.275 inch.

Pin Destinations for EN3 5-Pin Female Cable Mount Connector

Assembled EN3-to-Phoenix Cable

Pin #5, White,

audio (+)

Pin #4, Blue,

audio (–)

Pin #2, Red,

48 V DC (+)

Pin #1, Black,

48 V DC (–)

Pin #3, Shield drain,

audio shield

Pin #5, White,

audio (+)

Pin #4, Blue,

audio (–)

REAR

FRONT

Dimple identifies Pin #1

1”

0.275”

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Pas de commentaire

Meyer Sound UP-4XP Instructions d'exploitation Page 27